Your cart is currently empty
The board that started it all. The Lib Tech Skate Banana BTX Snowboard was the originator of Lib Tech's signature Banana rocker technology. By placing cambered pockets under each foot with a rockered section in the middle, the Skate Banana lets you pop and pivot at will, enjoying all the benefits of both rocker and camber. With Magne-Traction enhanced edging on groomers and a park ready twin profile, this board is simple, intuitive, and ready to do it all in the resort.
Original Banana – Over a decade ago Lib Tech’s experieMENTAL division started a snowboard contour revolution with the introduction of the legendary Skate Banana model and Original Banana Technology’s mild rocker between your feet combined with mild cambers to the tips and tails.
Soft-Medium – A versatile, soft-medium flex is perfect for rider progression in the park, on the hardpack, and all over the mountain.
Original Power Construction – 75% Aspen / 25% Paulownia – Light. Environmentally nice. Strong.
Triaxial / Biaxial Fiberglass
Birch Internal Sidewalls
UHMW Sintered Sidewalls
UHMW Tip / Tail Impact Deflection
Eco Sublimated TNT – The highest density UHMW and fastest base material without wax. TNT features a unique dual-layer thermal fusion “phase alteration” process which aligns the molecular chains into an engineered crystalline structure. The titanium layer reflects light and heat, keeping the base at or near snow temperatures. The crystal layer is the fastest base material without wax, making it a very consistent sliding surface in a wide variety of conditions and wax wear lifecycles. Wax to conditions as normal, but the board will remain fast even as wax wears. TNT produces optimal graphic reproduction with the proprietary water based eco sublimation process. Easy to maintain easy to repair.
Magne-Traction® – Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.
Eco Sublimated Poly Top – High strength, impact resistant, lightweight dimensionally stable UV and temperature resistant top material decorated using an environmentally friendly eco sublimation process.
Art by Ryan Davis
Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.
2 x 4 Inserts
Size (cm) | 150 | 152 | 153W | 154 | 156 | 156W | 159 | 159W | 162W |
---|---|---|---|---|---|---|---|---|---|
Effective Edge (mm) | 1120 | 1140 | 1140 | 1150 | 1170 | 1200 | 1200 | 1200 | 1230 |
Tip Width (mm) | 288 | 289 | 299 | 290 | 295 | 305 | 297 | 307 | 310 |
Waist Width (mm) | 250 | 252 | 261 | 253 | 255 | 265 | 255 | 265 | 265 |
Tail Width (mm) | 288 | 289 | 299 | 290 | 295 | 305 | 297 | 307 | 310 |
Sidecut Radius (m) | 8.1 | 8.2 | 8.2 | 8.2 | 8.3 | 8.3 | 8.4 | 8.4 | 8.4 |
Stance Setback (in) | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Stance Range (in) | 19.25-24 | 20.25-25 | 20.25-25 | 20.25-25 | 20.25-25 | 20.25-25 | 20.25-25 | 20.25-25 | 20.25-25 |
Width | Regular | Regular | Wide | Regular | Regular | Wide | Regular | Wide | W |